Skip to content

Provisioning Architecture

The provisioning framework is responsible for all provisioning work done by MWARE IAM. This framework integrates with the Userstore Manager component and also receives provisioning requests from the authentication framework.


Inbound provisioning

Inbound provisioning focuses on how to provision users to the Identity Server. Out-of-the-box, MWARE IAM supports inbound provisioning via a SOAP-based API as well as the SCIM 2.0 API. Both the APIs support HTTP Basic Authentication. If you invoke the provisioning API with Basic Authentication credentials, then where to provision the user (to which userstore) will be decided based on the inbound provisioning configuration of the resident service provider.

The SCIM API also supports OAuth 2.0. If the user authenticates to the SCIM API with OAuth credentials, then the system will load the configuration corresponding to the service provider who owns the OAuth client id. If you plan to invoke the SCIM API via a web application or a mobile application, we would highly recommend you to use OAuth instead of Basic Authentication. You simply need to register your application as a service provider in Identity Server and then generate OAuth keys.


JIT provisioning

Just-in-time provisioning talks about how to provision users to the Identity Server at the time of federated authentication. A service provider initiates the authentication request, the user gets redirected to the Identity Server and then Identity Server redirects the user to an external identity provider for authentication. Just-in-time provisioning gets triggered in such a scenario when the Identity Server receives a positive authentication response from the external identity provider. The Identity Server will provision the user to its internal userstore with the user claims from the authentication response.

You configure JIT provisioning against an identity provider - not against service providers. Whenever you associate an identity provider with a service provider for outbound authentication, if the JIT provisioning is enabled for that particular identity provider, then the users from the external identity provider will be provisioned into the Identity Server's internal userstore. In the JIT provisioning configuration you can also pick the provisioning userstore.


Outbound provisioning

Outbound provisioning talks about provisioning users to external systems. This can be initiated by any of the following.

  • Inbound provisioning request (initiated by a service provider or the resident service provider)
  • JIT provisioning (initiated by a service provider)
  • Adding a user via the management console (initiated by the resident service provider)
  • Assigning a user to a provisioning role (initiated by the resident service provider)

MWARE IAM supports outbound provisioning with the following connectors. You need to configure one or more outbound provisioning connectors with a given identity provider, and associate the identity provider with a service provider. All the provisioning requests must be initiated by a service provider - and will be provisioned to all the identity providers configured in the outbound provisioning configuration of the corresponding service provider.

  • SCIM
  • SPML
  • SOAP
  • Google Apps provisioning API
  • Salesforce provisioning API

JIT provisioning happens while in the middle of an authentication flow. The provisioning can happen in a blocking mode or in a non-blocking mode. In the blocking mode, the authentication flow will be blocked until the provisioning finishes - while in the non-blocking mode, provisioning happens in a different thread.


Conditional provisioning with roles

If you want to provision a user to an external identity provider, for example to Salesforce or Google Apps, based on the user's role, then you need to define one or more provisioning roles in the outbound provisioning configuration of the corresponding identity provider.


SCIM implementation using WSO2 Charon

WSO2 Charon is an open source implementation of SCIM protocol, which is an open standard for Identity Provisioning. It can be used by anyone who wants to add SCIM-based provisioning support for their applications. WSO2 Charon is integrated with MWARE IAM. This section demonstrates the utilization of SCIM endpoints which expose user and group resources in a RESTful way.

Charon library comprises of four main components.

Components of the Charon library

Charon — Core

As the name implies, this is the core part of the library which implements SCIM .02 specification and exposes a set of APIs for SCIM 2.0 consumers. The main functionalities of Charon core are as below.

  • Create SCIM 2.0 Objects - SCIM is built on an object model where a resource is a common denominator and all SCIM Objects are derived from it. Charon core contains SCIM Object Implementation where the object is a collection of attributes.

  • Decode JSON encoded resource Strings - This implementation allows to decode the JSON-encoded resource string and to create SCIM object model adhering to the specification. The class, JSONDecoder.java is responsible for this.

  • Encode SCIM objects - This implementation allows to create the encoded JSON response from the SCIM object model and send the SCIM response object using the JSONEncoder.java class.

  • Set Attributes - Attributes can be simple types such as name or id, complex types such as email address and address (attributes which have sub attributes), or multivalued types such as email or telephone number.

  • Define Schema - Schema is a collection of attribute definitions that describe the contents of an entire or partial resource. AttributeSchema defines schema for SCIM attributes and sub attributes. The attribute definitions specify the name of the attribute, and metadata such as type (e.g., string, binary), cardinality (singular, multi, complex) and mutability ResourceTypeSchema defines resource schema definitions (Ex: urn:ietf:params:scim:schemas:core:2.0:User, urn:ietf:params:scim:schemas:core:2.0:Group)

  • Exposes Endpoints

    • UserResourceManager - UserResourceManager API is exposed to perform operations on user resource. A SCIM client can call this API and perform CRUD operations on a user.

    • GroupResourceManager - GroupResourceManager API is exposed to perform operations on group resource. A SCIM client can call this API and perform CRUD operations on a group.

    • MeResourceManager - By using MeResourceManager, a SCIM client can use a URL like <\base_url>/Me to perform CRUD operations as the authenticated subject. This API is also accessible from the SCIM client.

    • BulkResourceManager - The API BulkResourceManage is exposed from charon-core to perform bulk operations. A SCIM Service provider can call this API to perform bulk operations based on the HTTP requests sent from a SCIM client.

    • ResourceTypesResourceManager - The API, ResourceTypesResourceManager specifies the metadata about resource types.

    • ServiceProviderConfigResourceManager - By using ServiceProviderConfigResourceManager, a SCIM client can discover the SCIM specification features in a standardized form and other additional implementation details.

  • Extension Points - There are some extension points through which users can plug their own custom implementations with wso2 charon-core.

    • UserManager
    • CharonManager
    • AbstractSCIMObject
    • AbstractAttribute
    • JSONEncoder
    • JsonDecoder

    As Charon is a library, these extension points are not pluggable to the Identity Server. Instead, the clients which use Charon for the SCIM implementations can develop own custom implementations using Charon.

Charon — Implementations

This contains sample implementation of the SCIM service provider to illustrate how any SCIM implementation can utilize the API and the supporting module provided by Charon.

Charon — Utils

This contains the default implementations of the extension points. For example, DefaultCharonManager is used to initialize the extension points while InMemoryUserManager is the default implementation of UserManager. Inside the DefaultCharonManager the InMemoryUserManager instance is created and used in the charon implementations.

Charon — Samples

This contains samples illustrating the SCIM use cases. Samples mainly contain the SCIM client side implementations which can be run against a SCIM server, and hence can also be referenced to get to know how the API provided by Charon can be used to implement SCIM client side.


Extensible SCIM user schemas

MWARE IAM allows users to define their own user schema in addition to the core user schema. These configured schema are then used while creating or validating user objects. This means that custom user attributes can be passed using SCIM for identity management requirements. Follow the steps given below to add a custom attribute.

For information on Extending SCIM 2.0 User Schemas, see here


cURL commands

Given below are the cURL commands to add a user. The attribute name for the wso2Extension is EnterpriseUser.

  • Primary Userstore Command
curl -v -k --user admin:admin --data "{"schemas":[],"userName":"SureshAtt","password":"Wso2@123","EnterpriseUser":{"employeeNumber":"000111","costCenter":"111111","organization":"WSO2Org","division":"Engineering","department":"Intigration","manager":{"managerId":"111000","displayName":"Prabath"}}}" --header "Content-Type:application/json" https://localhost:9443/scim2/Users
  • Secondary Userstore Command
curl -v -k --user admin:admin --data "{"schemas":[],"userName":'mysql/kim',"password":"Wso2@123"}" --header "Content-Type:application/json" https://localhost:9443/scim2/Users

Note that the username is preceded by the domain and is within single quotes 'mysql/kim'. Also note that 'mysql' here is a reference to a domain name.

The above command provides the following results:

  • Primary Userstore Output
{"meta":{"created":"2021-03-24T08:52:13.309Z","location":"https://localhost:9443/scim2/Users/49656a04-99d9-4c45-a137-59d458abfd79","lastModified":"2021-03-24T08:52:13.309Z","resourceType":"User"},"schemas":["urn:ietf:params:scim:schemas:core:2.0:User","urn:ietf:params:scim:schemas:extension:enterprise:2.0:User"],"roles":[{"type":"default","value":"Internal/everyone"},{"display":"everyone"}],"name":{"familyName":"SureshAtt"},"id":"49656a04-99d9-4c45-a137-59d458abfd79","userName":"SureshAtt"}
  • Secondary Userstore Output
{"id":"2e89cac0-17f3-40e7-8a07-ff1047a70cf1","schemas":["urn:scim:schemas:core:2.0"],"userName":"mysql/kim","meta":{"lastModified":"2021-03-24T14:31:30","location":"https://localhost:9443/wso2/scim2/Users/2e89cac0-17f3-40e7-8a07-ff1047a70cf1","created":"2021-03-24T14:31:30"}}'}}

Related topics

See SCIM 2.0 APIs for more cURL commands that can be used to do various functions using the SCIM endpoints available.

Top